Continuous Ceramic Fiber 3D-Printing Filament
Description
Al₂O₃/f-OXIDE feedstock combines continuous alumina fiber reinforcement with an oxide ceramic matrix for additive-manufacturing development. It is intended for processes that place continuous reinforcement while building ceramic composite structures.
CHARACTERISTICS
- Continuous reinforcement
- Oxide ceramic composition
- Complex geometry without conventional tooling
- Process-specific composite feedstock
SPECIFICATION
| Family | Subgrade | Listed filament size (mm) | Reported tensile strength (MPa) | Modulus (GPa) |
|---|---|---|---|---|
| A857-D8 | D8-45 | 1 × 2 × 0.5 | 2500 | 260 |
| A857-D8 | D8-52 | 1 × 3 × 0.75 | 2500 | 260 |
| A857-D8 | D8-58 | 2 × 2 × 1.0 | 2500 | 260 |
| A857-D11 | D11-48 | 1 × 2 × 0.5 | 2300 | 230 |
| A857-D11 | D11-55 | 1 × 3 × 0.75 | 2300 | 230 |
| A857-D11 | D11-60 | 2 × 2 × 1.0 | 2300 | 230 |
| Property | Specification |
|---|---|
| Color | White |
| Reported density | 3.2 g/cm³ |
| Breaking elongation | 1.0% |
PERFORMANCE
The source table reports feedstock-related tensile properties; they must not be treated as printed-part design allowables. Printing, fiber orientation, debinding and sintering determine the final component properties.
CUSTOMIZATION
Discuss printer compatibility, feedstock cross-section, fiber architecture and the downstream ceramic processing route before ordering.
APPLICATION
- Oxide ceramic composite prototyping
- High-temperature component research
- Electrical insulating structures
- Catalyst-support development
CERTIFICATION
Specify the required technical data sheet, batch certificate of analysis and application test reports in your inquiry. Certification scope must be confirmed for the selected grade and manufacturing site; company management-system credentials do not replace product qualification.
Inquiry
Ask about: Continuous Ceramic Fiber 3D-Printing Filament
