Mullite Slurry
Description
JL-M150 is a fine mullite slurry for refractory, precision ceramic and composite ceramic processing. It combines high solids loading with a fine particle distribution and low-temperature sintering capability.
CHARACTERISTICS
- Mullite ceramic phase
- Fine particle size
- Low viscosity
- Suitable for impregnation and coatings
SPECIFICATION
| Property | Specification |
|---|---|
| Model | JL-M150 |
| Al₂O₃ : SiO₂ | 72 : 28 by mass |
| D50 | 100–150 nm |
| Solids content | 20–50% |
| Viscosity | <50 mPa·s |
| Packaging | 25 kg PE drum |
Additional JL-M150 data — Chinese brochure
| Property | Reference value |
|---|---|
| Appearance / phase | White slurry / mullite |
| Ceramic yield | 19–49% |
| Na | <10 ppm |
| K | <10 ppm |
| Ca | <5 ppm |
| Zr | <5 ppm |
| Fe | <10 ppm |
| Cl | <1 ppm |
Ceramic yield and slurry solids content describe different measurements. Confirm the conversion schedule for the selected formulation.
PERFORMANCE
| Property | Specification |
|---|---|
| Reported sintering temperature | 1100°C |
| Sintered density | 2.6 g/cm³ |
| Reported shrinkage | 4–5% (Chinese brochure) |
Sintering results depend on forming pressure, drying and firing schedule. The Chinese brochure lists 150 MPa powder compaction for the test route.
CUSTOMIZATION
Discuss solids content, rheology and coating or infiltration requirements. Keep sealed, protected from light and stored to the supplied handling instructions.
APPLICATION
- Refractory coatings
- Oxide ceramic matrices
- Precision ceramic forming
- Foundry coating development
CERTIFICATION
Specify the required technical data sheet, batch certificate of analysis and application test reports in your inquiry. Certification scope must be confirmed for the selected grade and manufacturing site; company management-system credentials do not replace product qualification.
Inquiry
Ask about: Mullite Slurry
